![]() |
Page 1 of 3
|
Tutorial: Object creation for absolute beginners
1 Attachment(s)
Object creation for absolute beginners
An easy-to-follow tutorial on how to make your own Sims 2 objects, written for those who have never cloned an object before – or those who have already tried and have run into problems along the way. ![]() It contains: * Screenshots that match the latest version of SimPE (April 2010) * Detailed instructions and explanations for the entire object creation process: How to clone an object * Additional advice on: What object to use as base for your clone The tutorial is provided in PDF format. I hope it will be of help to all those who want to try their hand at creating their own Sims 2 objects. It isn't all that daunting once you get started. Good luck with your endeavours and never hesitate to ask questions! ![]() |
"To me it has always been important to know not only WHAT to do, but also to understand WHY I have to do it."
-this is from your tutorial I agree! Thanks for such a wonderful and easy to follow tutorial. |
Oh my goodness, thank you so much!! =D Finally, an EASY to understand tutorial!! Most other tutorials I've looked at just tell you what to do to make whatever object they're making in the tutorial... It's all "now click this and this and this" without really explaining WHAT they're doing! This one made so much more sense to me! And I feel like I could take what I learned in this tutorial and use it to create a multitude of objects =) Thanks again!
|
Hello
I've little problem. I want try to work with your tutorial. It's my first try to make a mesh. But...
Quote:
I don't have GMDC there: ![]() ![]() |
You also don't have the SHPE, MMAT, TXMT, TXTR, CRES..and I don't know what else is missing. What object did you clone? And are you sure you had all the appropriate boxes checked before you clicked start? (Did you click "set defaults"? Although I usually UNcheck change description and save that part until the end.)
|
I've cloned The Talking Table. I did it as it is in tutorial:
Quote:
(page 8) EDIT// I have checked this: ![]() |
That looks weird. I'd throw the package out and start again from the bottom.
|
I was going to say that having "reference original mesh" checked would cause the GMDC to be missing. That was before you added the screenshot though. I agree with Moune- throw it away and start over. Out of curiosity, what version of SimPE do you have?
|
http://sourceforge.net/project/down...e_0_73_44-QA.7z
I just came to that page and downloaded the first version ![]() |
I'm encountering the exact same problem. I've tried a few times and it's still not showing up. I have window's 7 do you think that might be a factor?
|
Is that version an install version or unpack yourself? Is your game installed in the default location? Does the game pick up the games files in preferences?
Windows 7 is not an issue, it's just an OS. No different than Vista or XP. If you have the install version try uninstalling and reinstalling. Go to preferences and make the the game settings have the folders in there, which they should if your game is installed in the default location. If you have installed it elsewhere you may need to point SimPE to your install location. |
I have the game installed in the default location. I've been having other programs install strangely since I've upgraded to 7 glad that's not the issue. I down loaded the install but then I saw that there was a newer version on SimPE site. I thought it was odd that it just ran out of the unzipped folder so think didn't install it properly or just go back to the install version. I have to figure how to do the manual install at some point. Thanks for the help HugeLunatic, I very much appreciate it.
|
Great tutorial!
![]() |
Thank you for this tutorial!! I've create the table mesh,
on Milkshape but I can't export it because I must be subscribed and pay for exporting meshs....But you've said in this tutorial that it working with the 30 days free trial period...Is there another solution?Help! ![]() |
Not that I know of. If your trial version has run out, you'll have to register it. Otherwise you can switch to Blender which I think is free, but I'm not familiar with that programme, so I can't help you there.
|
okay,thank you, so if I understood, we can't export with the trial version...
|
As far as I remember you should be able to export with the trial version - until it expires of course. You could check on the MilkShape site if that's still the case or look in their forum to see if others have had the same problem.
|
Okay, because I've downloaded the trial version yesterday....I'll try to search more.Thanks again for the help!
![]() |
Is it possible to do this without UV Mapper. It looks rather complicated to me.
I want to make a Berliners Ball as deco and then as custom food. http://www.unipage.be/uploads/tx_ms...-1270227252.jpg |
About MilkShape- if you have the trial version, you can't export. I tried it out with mine before I registered it and export wasn't available. I got a pop-up telling me to register.
About mapping- Don't know what you would be using to mesh- I use MilkShape and you can map your mesh in it. You'd assign a material and move/scale your mesh to fit/where you want it in the Texture Coordinator Editor window. UVMapper isn't that complicated though- it's just about the same process. (That said, I prefer to map in MilkShape- Orange Mittens has a tutorial at Jupiter Sun that I used to learn. At least I think it's OM, if not..sorry!) |
Quote: Originally posted by mustluvcatz
Is this a new phenomenon? I've used the trial on my Windows box in Feb or March this year, and I was able to export with no issues, for the entire time the trial was valid (I never bought it). Later (I guess in April, and then again in June), I tried to use it on my OS X machine (in mono) – it worked perfectly as far as meshing goes, but like you say, I couldn't export because all I got was the "you need to register " popup. I was thinking it's an issue with running it in mono, but since I re-downloaded it for the OS X install, it might just as well be a version problem if you're getting the same thing under Windows. |
I honestly don't know if having to register is a new thing. Before my hdd crashed I was using the same version that I am now- 1.8.4 - but I never actually meshed during the trial. Since I had to reinstall, I figured I'd test the "You need to register.." thing out before I registered it.
|
If you can't export with Milkshape isn't it better to download Wings 3D? I heard it's not that bad either.
(I'm really new to this. I never meshed before) |
That I don't know since MilkShape is all I've ever used. It would be interesting to see if "you" (meaning anyone) can export with a different version than 1.8.4 of MilkShape though. If it can be done- there's the 30 day trial at least.
*but it's totally up to you (and anyone else) what program you want to get and learn to use ![]() |
The thing with that trial version is that you really need time the next 30 days and I can never be sure I will have time. I don't want to install it and waste the time of the trial.
Maybe I can look for a tutorial with Wing 3D first. |
All times are GMT +1. The time now is 4:18 AM. |
Page 1 of 3
|
Powered by: vBulletin Version 3.0.14 · Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.